Pressure Testing
- magicman
- Trusted Seller
- Posts: 3879
- Joined: Thu Jan 29, 2009 4:45 pm
- CW-watches: 2
- Location: Loughton, Essex
Pressure Testing
Hello there.
I've just enquired at a local watch service center, and to pressure test my Octon dive watch will be around £35.
Is that a decent price ? and do you get yours done regularly ?
Just done 5 mins research, and it seems if you get your watch wet. It's recommended that you get it tested anually.
Regards Steve
I've just enquired at a local watch service center, and to pressure test my Octon dive watch will be around £35.
Is that a decent price ? and do you get yours done regularly ?
Just done 5 mins research, and it seems if you get your watch wet. It's recommended that you get it tested anually.
Regards Steve
Selling Tudor Pelagos 39
- Amor Vincit Omnia
- Moderator
- Posts: 33793
- Joined: Sat Jun 11, 2011 7:34 pm
- CW-watches: 4
- Location: Norfolk, UK
Re: Pressure Testing
I’ve read that too, Steve, though I suspect it might be honoured more in the breach than in the observance by most of us. I have had my Meistersinger about 14 months and if I take it on holiday in September I’ll probably just make sure the crown is screwed in properly and trust it. Actually, I almost always take watches off when swimming these days.
Steve
Linguist; retired teacher; pilgrim; apprentice travel writer
Take nothing but pictures, leave nothing but footprints, kill nothing but time
Avoid loud and aggressive persons; they are vexatious to the spirit. (Max Ehrmann)
Linguist; retired teacher; pilgrim; apprentice travel writer
Take nothing but pictures, leave nothing but footprints, kill nothing but time
Avoid loud and aggressive persons; they are vexatious to the spirit. (Max Ehrmann)
- H0rati0
- Senior Forumgod
- Posts: 2314
- Joined: Wed Jun 27, 2018 7:49 am
- CW-watches: 4
- Location: Alpenvorland
Re: Pressure Testing
That sounds expensive, the last time I had one done cost €10 at the local watchmaker, only a 10bar test though more than enough for most purposes.
Just a thought: if you plan on testing regularly you can buy cheapo wet pressure testers (the sort that pressurise the watch case so that you can immerse it and see if bubbles escape) on ebay for something like £100 - though you'd have to factor in import charges as they probably ship out of China. At £35 a pop, I'd be tempted to go the DIY route.
Just a thought: if you plan on testing regularly you can buy cheapo wet pressure testers (the sort that pressurise the watch case so that you can immerse it and see if bubbles escape) on ebay for something like £100 - though you'd have to factor in import charges as they probably ship out of China. At £35 a pop, I'd be tempted to go the DIY route.
"There is no beginning to enlightenment and no end to training" - Dogen Zenji (1200-1253)
- magicman
- Trusted Seller
- Posts: 3879
- Joined: Thu Jan 29, 2009 4:45 pm
- CW-watches: 2
- Location: Loughton, Essex
Re: Pressure Testing
^^^ Thanks, I've got another repairer to visit tomorrow, so I'll get a price from him.
I've never been asked if I required this testing, whenever I've had a battery change, so if it is a cheap service, I'm not sure why they wouldn't offer it. After all, they are checking their own work is done correctly.
I'm not sure I'll be removing, any more casebacks, had a problem getting a press fit one back on my wife's Tissot.
Regards Steve
I've never been asked if I required this testing, whenever I've had a battery change, so if it is a cheap service, I'm not sure why they wouldn't offer it. After all, they are checking their own work is done correctly.
I'm not sure I'll be removing, any more casebacks, had a problem getting a press fit one back on my wife's Tissot.
Regards Steve
Selling Tudor Pelagos 39
- magicman
- Trusted Seller
- Posts: 3879
- Joined: Thu Jan 29, 2009 4:45 pm
- CW-watches: 2
- Location: Loughton, Essex
Re: Pressure Testing
- These users thanked the author magicman for the post:
- suicidal_orange
Selling Tudor Pelagos 39
- jkbarnes
- Senior Forumgod
- Posts: 7852
- Joined: Wed May 24, 2017 8:39 pm
- CW-watches: 3
- Location: Virginia, USA
Re: Pressure Testing
Isn’t that a handy little DIY tip! Thanks for sharing.magicman wrote: ↑Wed Jul 21, 2021 4:06 pm Might give this a go. Seems simple enough.
https://youtu.be/qBZbLdotrG0
Regards Steve
Drew
- magicman
- Trusted Seller
- Posts: 3879
- Joined: Thu Jan 29, 2009 4:45 pm
- CW-watches: 2
- Location: Loughton, Essex
Re: Pressure Testing
^^^I've got something arriving shortly from Amazon to regas my Air conditioning, so I may have valves and a gauge from that kit, that will be usable, for this.
Regards Steve
Regards Steve
Selling Tudor Pelagos 39
Re: Pressure Testing
I suppose it might be because of the potential cost of a catastrophic failure. There's also the cost of removing the movement to test the empty case if you are doing wet tests (offhand I'm not sure how the crown gaskets seal without a watch inside, but maybe the crown will seal without it being attached to a movement)magicman wrote: ↑Wed Jul 21, 2021 3:57 pm ^^^ Thanks, I've got another repairer to visit tomorrow, so I'll get a price from him.
I've never been asked if I required this testing, whenever I've had a battery change, so if it is a cheap service, I'm not sure why they wouldn't offer it. After all, they are checking their own work is done correctly.
I'm not sure I'll be removing, any more casebacks, had a problem getting a press fit one back on my wife's Tissot.
Regards Steve
Anyway, here's an interesting look and learn review of what's involved by Marc at Long Island Watches, that I found. Worth watching although it's not a short video. It discusses 3 different systems, one dry and two wet.
My link was incorrect. @Lavaine below has very kindly fixed it for me.
-
- Senior Forumgod
- Posts: 3918
- Joined: Sun Oct 03, 2010 5:45 pm
- CW-watches: 5
- Location: Alberta, Canada (The Great White North, eh!)
Re: Pressure Testing
Here's the correct link to the video with Marc at Long Island:
https://www.youtube.com/watch?v=YS0lKaZxVVs
2017 CW Forum "Darwin Award" winner.
Re: Pressure Testing
^^^^^
Thanks for that. I was trying to copy the link on my phone which I find hard enough anyway. I must have had that trailer instead. I didn't check it, I just assumed I had the right link.
Thanks for that. I was trying to copy the link on my phone which I find hard enough anyway. I must have had that trailer instead. I didn't check it, I just assumed I had the right link.
- magicman
- Trusted Seller
- Posts: 3879
- Joined: Thu Jan 29, 2009 4:45 pm
- CW-watches: 2
- Location: Loughton, Essex
Re: Pressure Testing
You would have thought, after 12 plus years on a watch forum, I would have all this knowledge. And not even have to enquire on here.
I should be answering questions not asking them.
I don't think I'll ever reach the rank of WIS.
Regards Steve
I should be answering questions not asking them.
I don't think I'll ever reach the rank of WIS.
Regards Steve
Selling Tudor Pelagos 39
- gwells
- Senior Forumgod
- Posts: 7642
- Joined: Mon Feb 13, 2012 4:02 am
- CW-watches: 1
- Location: falls church, va
Re: Pressure Testing
i guess it depends upon what you're testing. i might be more likely to either "wing it" or go cheap on a $300 watch. but a $4000 watch? i want that tested properly and $35 doesn't seem that bad for the peace of mind.
the "g" is for Greg...
- rkovars
- Senior Forumgod
- Posts: 3256
- Joined: Tue Apr 14, 2020 7:56 pm
- CW-watches: 5
- Location: New England, US
Re: Pressure Testing
This is the best video I have found that shows all of the different equipment used to pressure test a watch. It is very in-depth but worth the time IMO.
Life is not a matter of holding good cards, but sometimes, playing a poor hand well.
Jack London
Jack London
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0 Replies
- 160 Views
-
Last post by rkovars
-
- 59 Replies
- 1647 Views
-
Last post by exHowfener